SaitechAI Playlists — Coatings Gallery

Why treatment? To clean, activate and protect metal surfaces before coating.
Types: Degreasing, Derusting, Surface Conditioning, Phosphating, Passivation.
SaitechAI eLearning: Complete 6-hour training with ASTM/BIS methods.
Consultancy: Bath setup, FA/TA ratio, coating weight, troubleshooting.

Why water-based? Low VOC, eco-friendly, quick drying and easy cleanup.
Types: Emulsions, Primers, Putties, Distempers, Acrylic Topcoats.
SaitechAI eLearning: Covers formulation, CPVC, MFFT, viscosity, and tinting control.
Consultancy: Resin–pigment balance, stability improvement, and defect correction.

Why solvent-based? High gloss, durability, and weather resistance for industrial and decorative use.
Types: Alkyds, Nitrocellulose, PU, Epoxy, Synthetic Enamels.
SaitechAI eLearning: Learn solvent selection, viscosity control, solids by volume, drying & curing tests.
Consultancy: Formula validation, solvent blends, drying defect analysis, and VOC compliance.

Why construction chemicals? To improve strength, adhesion, and durability of concrete and coatings.
Types: Waterproofing, Admixtures, Primers, Putty, Crack Fillers, Tile Adhesives.
SaitechAI eLearning: Mix design optimization, bonding tests, permeability, and curing practices.
Consultancy: Product formulation, performance testing, defect analysis, and site support.

Why testing? To ensure raw material consistency and coating performance.
Tests: Pigment moisture, oil absorption, tinting strength, resin solids %, solvent purity & evaporation rate.
SaitechAI eLearning: Hands-on ASTM/BIS methods, QC data interpretation, and instrument calibration.
Consultancy: Lab setup guidance, testing SOPs, validation of supplier specs, and training.

Why defects occur? Improper pretreatment, poor formulation, or incorrect process parameters.
Common issues: Pinholes, Blistering, Orange Peel, Flocculation, Poor Adhesion.
SaitechAI eLearning: Root-cause analysis, defect mapping, and corrective actions across pretreatment and paint stages.
Consultancy: Process audits, bath checks, defect troubleshooting, and coating performance improvement.